I had some old knocked about spacers i was going to use on my 350z build, but decided something that important, as in holding your bloody wheels on, i had best get some new ones. I contacted Greg at GK Tech and a day later had some shiny new spacers. Quality was fantastic, and gave me confidence they can do the job. They are supplied with the nuts to fit them to your hubs and then just use you lug nuts as per usual. Make sure you torque them up correctly, As per the Nissan tech guide the recommend torque setting of between 72-87 Ft. Lbs. Anything more than this will strip the stud and is DANGEROUS. The setting of 72-87 is as per Nissans specifications.
To dabei have done a full dyne day and 3 days at Winton with no signs of failure or issues at all. So thats with 310 slicks and 400rwhp. For just over 100 AUS bucks i think thats great value, and will certainly be purchasing any more spacers i need fro Gregg at GK Tech
The GKTECH 25mm bolt on spacers allow for adjustment of the fitment of your wheels. The wheel spacers are hub centric to suit Nissans 66.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength along with grade 10.9 extended studs.
- CNC machined aluminium T6-6061 construction
- Grade 10.9 studs
- Hub centric to suit 66.1mm Nissan hubs
- 114.3mm PCD with M12 x 1.25 thread
- 45mm long studs from our US warehouse, 60mm long studs from our Australian Warehouse
- Sold as a PAIR